Draught Proofing Your Newcastle Home Before Winter
Doors, windows, loft hatches and letterboxes: a practical guide to stopping draughts in your Newcastle home without blocking the ventilation it needs.
Sagging, sticking or broken gates rehung, braced and secured so they open smoothly and latch every time.

A garden gate gets more use than almost anything else outside. Over time hinges work loose, posts lean, timber swells and the gate starts to drag on the path or refuses to latch. Before long you are lifting it every time you put the bins out, or the dog finds a way through the gap.
Andrew repairs and rehangs timber and metal garden gates for homes across Newcastle, Heaton, Gosforth and North Tyneside. Common jobs include fitting heavier hinges, adding a diagonal brace to stop sagging, replacing latches and bolts, planing a swollen gate so it closes, and resetting or replacing a rotten gate post. Where a gate is beyond saving, he can fit a new ready-made timber gate or build one to suit an awkward opening.
Every job starts with working out why the gate has failed, not just treating the symptom. A gate that sags because the post is rotten will sag again if only the hinges are changed. Andrew explains what he finds, quotes for the fix that will last, and leaves the gate swinging freely and closing securely.
Most sagging comes down to one of three things. The first is the gate itself: a timber gate without a diagonal brace, or with the brace fitted the wrong way, will drop at the latch end. The brace should run from the bottom hinge corner up to the top latch corner.
The second is the hinges. Light hinges with short screws pull out of the timber over time, especially on wide or heavy gates. Longer T-hinges or bolted-through hinges spread the load much better.
The third is the post. A post that has rotted at ground level, or was never set deep enough, will lean towards the gate. No amount of new hardware will fix that, so Andrew checks the post first and will reset it in concrete or fit a new one if needed.
Side and back gates are a common way into gardens, so it is worth making them harder to open from outside. Practical improvements include:
Andrew can add these as part of a gate repair, and look at the rest of your garden security on the same visit if you would like.
Many gates can be saved with new hinges, a brace and some adjustment. If the timber is soft and rotten, or the frame has split badly, replacing it is usually better value. Send a few photos, including close-ups of the hinge side and the bottom of the gate, and Andrew will give you an honest view.
Andrew can adjust metal gates, fit new hinges, latches and bolts where they are bolted on, and reset posts. Repairs that need welding, such as broken metal frames or snapped hinge pins welded to the gate, need a fabricator. He will tell you which kind of repair your gate needs.
Usually, yes. A leaning post can sometimes be straightened and re-concreted. If the timber has rotted at ground level, it is better to replace it, either with a new post or a concrete spur. Andrew will check whether any nearby fence panels are affected too and include them in the quote if needed.
Yes. Many Newcastle back lanes and side passages have openings that do not match standard gate sizes, or have a slope. Andrew can trim a ready-made gate to fit, or make a timber gate to measure. He will make sure it clears the ground along its swing.
Yes. Gate and fence problems often go together, especially after winter winds. Andrew can replace panels, repair rails and reset posts on the same visit. It is all priced in one quote, so you only need one booking, and the gate and fence can be finished to match each other where the timber allows.
Tell Andrew what needs fixing – send a couple of photos and you’ll get a clear quote. One visit can sort several small jobs.
Doors, windows, loft hatches and letterboxes: a practical guide to stopping draughts in your Newcastle home without blocking the ventilation it needs.
The common repairs to sort between tenants, how to use inventory photos, and tips for student lets in Jesmond and Heaton. A practical checklist for landlords.
Brick, block, plasterboard or a Tyneside flat partition wall? How to tell what your wall is made of, which bracket suits it and how to tidy the cables safely.
Black mould, gaps and peeling silicone are signs your bath or shower needs resealing. Learn why mould returns, how long sealant takes to cure and when to worry.
Storm damage to your shed roof? How to decide between a patch repair and full re-felting, plus what to check on boards, doors and the base.
Curtain poles, blinds, TV mounting, flatpack and furniture anchors: the handyman jobs worth booking in your first week after moving in.