Local handyman for Newcastle upon Tyne & surrounding areas Free quotes from photos
CallFree quote

How to Tell When Your Bath or Shower Needs Resealing

How to Tell When Your Bath or Shower Needs Resealing

The silicone seal around a bath or shower tray does a quiet but important job. It stops water running down the gap between the bath and the wall, where it can soak into plaster, floorboards and the ceiling below. When the seal fails, the first sign is often just a bit of black mould. Left alone, it can become a much bigger problem. Here is how to tell when your bath or shower needs resealing, and what to watch for in the meantime.

Signs your seal needs replacing

  • Black or dark spots in the silicone that will not clean off. Once mould grows into the sealant itself, surface cleaning only lightens it for a while.
  • Gaps, cracks or splits along the seal, particularly in the corners.
  • Silicone peeling away from the tiles or bath edge. If you can slip a fingernail behind it, water can get behind it too.
  • Discoloured or yellowing sealant that has gone hard and brittle with age.
  • Loose or wobbly tiles near the bath, which can be a sign water has been getting in for a while.
  • Damp patches or staining on the ceiling or wall below the bathroom.

Why mould keeps coming back

Many people clean their sealant with mould spray, only to find the black spots return within weeks. There are a few common reasons:

  • The mould has grown into the silicone, so cleaning only removes the surface layer.
  • The old sealant was never fully removed before the last reseal, so mould was trapped underneath.
  • The bathroom stays damp for long periods. Plenty of homes in Newcastle have small bathrooms with limited ventilation, and steam needs somewhere to go.
  • The wrong type of sealant was used. A sanitary silicone with a mould inhibitor is designed for wet areas.

Running an extractor fan during and after a shower, opening a window when you can and wiping down the seal occasionally all help a new seal stay clean for longer.

How a proper reseal is done

  1. All old silicone is cut and scraped away completely, including any residue.
  2. The joint is cleaned and treated to remove mould spores, then left to dry thoroughly.
  3. For a bath, it helps to fill it with water before sealing. This lowers the bath to its loaded position, so the seal is not stretched when someone gets in.
  4. A neat, continuous bead of sanitary silicone is applied and tooled to a smooth finish.

Rushing any of these stages, especially the drying, is the main reason reseals fail early.

Cure times: how long before you can use it?

Silicone usually skins over fairly quickly, but it takes much longer to cure all the way through. Always follow the manufacturer's guidance on the tube, as products vary. As a rule, it is best to avoid using the bath or shower until the sealant has fully cured, which often means waiting until the next day. Using it too soon can wash out or distort the bead and leave weak spots where water can creep in.

When it might be a bigger leak

Sometimes a failed seal is a symptom rather than the cause. Be alert to:

  • Water stains on the ceiling below that keep spreading after resealing
  • A bath that flexes or moves when you step in, which can keep cracking new seals
  • A shower tray that rocks or has cracked
  • Soft or springy flooring around the bath or shower
  • Dripping from waste pipes or around the shower valve

These can point to leaking pipework, a poorly supported bath or tray, or water damage underneath. Resealing on its own will not fix them. Some issues, such as firming up a bath or fixing loose panels, are straightforward repairs. Others may need a plumber.

When to call a handyman

Resealing looks simple, but getting a clean, watertight finish takes patience and practice. It is worth calling for help if:

  • You have tried resealing before and the mould came back quickly
  • The old silicone is thick, layered or difficult to remove
  • Tiles around the bath are loose or the grout is crumbling
  • You want the bath or shower panel and trims checked at the same time

Our bath and shower resealing service is available across Newcastle, Gateshead, North Tyneside and Northumberland, and we can look at other bathroom repairs on the same visit.

A small job that protects your home

A fresh, well-applied seal keeps your bathroom looking clean and helps protect the rooms below from water damage. Keep an eye on the corners, act early when you spot gaps or mould, and give the new seal time to cure properly. If you would like it done for you, call Andrew on 07960 485 880.

Frequently asked questions

How often should a bath or shower be resealed?

There is no fixed timescale. It depends on how much the bath or shower is used, how well the room is ventilated and how carefully the original seal was applied. The best guide is the condition of the silicone itself. Reseal when you see mould that will not clean off, gaps, cracks or sealant peeling away from the tiles or bath edge.

Can I just put new silicone over the old seal?

It is not a good idea. New silicone does not bond well to old silicone, and any mould or moisture underneath will remain trapped and can show through again. For a lasting result, the old sealant should be removed completely, the joint cleaned and treated, and the area left to dry fully before the new bead goes on.

Why is there water on my ceiling even after resealing?

If staining continues after a proper reseal, the seal may not be the cause. Possible culprits include leaking waste pipes, a faulty shower valve, a cracked shower tray or water getting behind loose tiles. Stop using the bath or shower if you can and have it investigated. Some issues are general repairs, while leaking pipework is a job for a qualified plumber.

From the blog

Latest handyman tips & guides

View all posts
Installations & fitting

Which Walls Can Hold a Wall-Mounted TV?

Brick, block, plasterboard or a Tyneside flat partition wall? How to tell what your wall is made of, which bracket suits it and how to tidy the cables safely.