A wall-mounted TV frees up floor space and looks tidy, but the wall behind it matters far more than the bracket on the box. Whenever I fit a TV in Newcastle, the first question I ask is always the same: what is this wall made of? Brick, block, plasterboard and the lath and plaster partitions found in many older Tyneside flats all behave differently, and each needs the right fixings to hold a screen securely.
How to tell what your wall is made of
Give the wall a gentle knock. A solid, dull sound usually means masonry. A hollow sound suggests plasterboard on a timber or metal frame. External walls in most homes are solid, while internal walls can be either. A stud detector helps to find timber or metal studs and is a useful first check, although it is not foolproof. Always use a detector to check for hidden pipes and cables before drilling, and avoid drilling directly above, below or beside sockets and switches where cables are likely to run.
Brick and block walls
Solid brick walls are generally the most straightforward. With the right wall plugs and screws, they hold even large screens securely. The key is drilling into the brick itself rather than the softer mortar joints. Concrete block walls are also strong, though lightweight aerated blocks are softer and benefit from specialist fixings designed for them. If the plaster is crumbly or there is a thick layer of render, longer fixings may be needed to reach sound material.
Plasterboard and stud walls
Plasterboard on its own is not designed to carry a heavy, overhanging load. A TV on an arm bracket pulls outward on the fixings, which is far more stressful than a picture hanging flat. For stud walls, the best approach is to locate the timber studs and fix the bracket directly into them. Where the studs do not line up with where you want the TV, heavy-duty cavity fixings rated for the weight can work for lighter screens and flat brackets. For larger TVs, adding a timber noggin or backing board behind the plasterboard gives a much more secure base.
Tyneside flat partition walls
Many of the classic Tyneside flats in Heaton, Sandyford, Gateshead and around Newcastle have internal partitions of lath and plaster, or thin walls that have been altered over the decades. These can be uneven, brittle or hollow in places, and the timber behind may not be where you expect. They need careful assessment before any TV goes up. Sometimes the answer is fixing into the timber framework, sometimes it is choosing a different wall. If in doubt, never guess. Where a wall's structure is in question, that is a matter for a builder or structural engineer, not a handyman.
Choosing the right bracket
- Flat or fixed brackets hold the TV close to the wall and put the least strain on fixings. Ideal for most rooms.
- Tilting brackets angle the screen down slightly, useful when mounting above eye level.
- Full-motion or cantilever arms swing the TV out and around. They are handy, but they place the most leverage on the wall, so they need the strongest fixing.
Always check the bracket matches your TV's VESA hole pattern and is rated for its weight, and check the fixings are suitable for the wall type too.
Tidying the cables safely
Dangling cables spoil the look. Surface trunking, painted to match the wall, is a neat and safe way to run power and aerial leads down to the TV unit. A few important points:
- Do not bury mains extension leads or plug-in power cables inside walls. They are not designed for it.
- If you want a socket moved or added behind the TV, that work must be done by a qualified electrician.
- Low-voltage cables such as HDMI and aerial leads can be routed more flexibly, but must still be kept clear of existing wiring.
For further guidance on electrical safety at home, Electrical Safety First is a useful resource.
When to call a handyman
Consider getting help if:
- You are not sure what the wall is made of
- The TV is large, heavy or going on a full-motion arm
- You are mounting over a chimney breast or onto an older partition wall
- You want the cables neatly concealed in trunking
Our TV wall mounting service covers Newcastle, North Tyneside, Gateshead and Northumberland. We can also put up shelves for consoles and soundbars as part of the same visit, see our odd jobs page.
Getting it right first time
The right wall, the right bracket and the right fixings make all the difference between a TV that stays put and one that slowly sags. Take time to check the wall, and if you would rather leave it to someone with the tools and experience, call Andrew on 07960 485 880.





